Cai, D., Li, J., and Dong, H. (2020, May). Modelling the evolution of MnS inclusions and macrosegregation during solidification using a three-phase model. In IOP Conference Series: Materials Science and Engineering (Vol. 861, No. 1, p. 012043). IOP Publishing.

Zhou, Z. N., Akamine, H., Li, J., Yang, L., Higashizono, T., Hu, Q. D., ... & Li, J. G. (2020). Tuning martensite transformation behavior and magneto-caloric effect in Ni44Mn36In14Co6 alloy through doping the fifth element Cu. Journal of Alloys and Compounds, 817, 153150.

Yang, L., Li, J., Zhou, Z., Zhang, R., Tu, D., Hu, Q., ... & Li, J. (2020). Direct formation of La (Fe, Si) 13 phase with enhanced mechanical property of off-stoichiometric La1. 7Fe11. 6Si1. 4 alloys by directional solidification. Journal of Alloys and Compounds, 817, 152694.

D’Souza, N.,  Roebuck, B.,  Collins, D.M.,  West, G.D., Panwisawas, C. (2020) Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings. Materials Science and Engineering A 773: 138862. DOI: (IF = 4.081)

Panwisawas*, C., Tang, Y.T., Reed, R.C. (2020) Metal 3D printing as a disruptive technology for superalloys. Nature Communications (Solicited publication) 11: 2327. DOI: (IF = 11.878)

Panwisawas*, C.,  Tang, Y.T., Ghoussoub, J.N., Reed, R.C. (2020) Additive manufacturability of nickel-based superalloys: Composition-process induced vapourisation; in Superalloys 2020; edited by S. Tin, et al. (Warrendale, PA, USA: TMS, 2020),

Tang*, Y.T.,  Ghoussoub, J.N., Panwisawas, C., Collins, D.M., Amirkhanlou, S., Clark, J.W.G., Németh, A.A.N, McCartney, D.G., Reed, R.C. (2020) The effect of heat treatment on tensile yielding response of the new superalloy ABD-900AM for additive manufacturing; in Superalloys 2020; edited by S. Tin, et al. (Warrendale, PA, USA: TMS, 2020),

Ghoussoub*, J.N., Tang, Y.T., Panwisawas, C., Németh, A.A.N., Reed, R.C. (2020) On the influence of alloy chemistry and processing conditions on additive manufacturability of Ni-based superalloys; in Superalloys 2020; edited by S. Tin, et al. (Warrendale, PA, USA: TMS, 2020),

Tang, Y.T., Panwisawas, C., Ghoussoub, J., Gong, Y.,  Clark, J., Németh, A., McCartney, D.G., Reed, R.C. (2020) Alloys-By-Design: Application to New Superalloys for Additive Manufacturing. Acta Materialia (IF = 7.293)

Collins*, D.M., D'Souza, N., Panwisawas, C., Papadaki, C., West, G.D., Kontis, P. (2020) Spinodal decomposition versus classical gamma-prime nucleation in a nickel-base superalloy powder: An in-situ neutron diffraction and atomic-scale analysis. Acta Materialia Preprint submitted to a journal arXiv preprint arXiv:2004.01146 (IF = 7.293)

Strickland, J.,  Nenchev, B., Perry, S., Tassenberg, K., Dong*, H.B., Gill, S., Panwisawas, C., Irwin, S., D’Souza, N. (2020) Hexagonally packed solidification of single crystal microstructures: Novel shape-limited primary spacing algorithm and mechanisms. Acta Materialia (IF = 7.293)

Jin J, Gao R, Peng H, Guo H, Gong S, Chen B, “Rapid solidification microstructure and carbide precipitation behavior in electron beam melted high-speed steel” (2020), Metallurgical and Materials Transactions A, vol. 51, pp. 2411-2429

Zhao Z, Zhang F, Dong C, Yang X, Chen B, “Initiation and early-stage growth of internal fatigue cracking under very-high-cycle fatigue regime at high temperature” (2020), Metallurgical and Materials Transactions A, vol. 51, pp. 1575-1592

Shen Y, Chen B, Wang C, “In Situ observation of phase transformations in the coarse-grained heat-affected zone of P91 heat-resistant steel during simulated welding process” (2020), Metallurgical and Materials Transactions A, vol. 51 pp. 3371-3376

Soundarapandiyan G, Khan R, Johnston C, Chen B, Fitzpatrick M. “Effect of postprocessing thermal treatments on electron-beam powder bed–fused Ti6Al4V” (2020) Mat Design Process Comm, e168, 1-8.

Kan W, Chen B, Peng H, Liang Y, Lin J, “Fabrication of nano-TiC reinforced high Nb-TiAl nanocomposites by electron beam melting” (2020), Materials Letters, vol. 259, Article 126856.

Yuan G, Zhang X, Chen B, Tu S, Zhang C, “Low cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach” (2020), Journal of Materials Science & Technology, vol. 38, pp. 28-38.


Zhao P, Chen B, Kelleher J, Yuan G, Guan B, Zhang X, Tu S, “High-cycle-fatigue induced continuous grain growth in ultrafine-grained titanium” (2019), Acta Materialia, vol. 174, pp. 29-42

Li Y, Zhang X, Parfitt D, Jones S, Chen B, “Characterisation of microstructure, defect and high-cycle-fatigue behaviour in a stainless steel joint processed by brazing” (2019) Materials Characterisation, vol. 151, pp. 542-552

Kan W, Chen B, Peng H, Liang Y, Lin J, “Formation of columnar lamellar colony grain structure in a high Nb-TiAl alloy by electron beam melting” (2019), Journal of Alloys and Compounds, vol. 809, Article 151673.

Cai, D., Ren, F., Ge, H., Kim, H. S., Li, J., & Li, J. (2019). Modelling of Inclusion Effects on Macrosegregation in Solidifying Steel Ingot with a Multi-phase Approach. Metallurgical and Materials Transactions A, 50(3), 1323-1332.

Fu, Y., Li, J., & Li, J. (2019). Photo-improved hydrogen evolution reaction activity of the Pt/CdS electrocatalyst. Progress in Natural Science: Materials International, 29(4), 379-383.

Yang, L., Zhou, Z., Feng, S., Li, J., Liu, J., Li, J., ... & Li, J. (2019). Microstructure and magnetic property of LaFe11. 6Si1. 4 magnetocaloric alloys by a novel short time heat treatment. Intermetallics, 105, 1-5.

Allen, A., Douglas, A. C., Feitosa, L. M., Qian, H., Li, J., Dong, H. B., ... & Li, Y. (2019, May). Solidification of niobium-silicide-based alloys during laser additive manufacturing process. In IOP Conference Series: Materials Science and Engineering (Vol. 529, No. 1, p. 012006). IOP Publishing.

Aucott, L., Li, J., Rack, A., & Dong, H. B. (2019, May). Solidification cracking during welding of steel: In situ X-ray observation. In IOP Conference Series: Materials Science and Engineering (Vol. 529, No. 1, p. 012026). IOP Publishing.